manualshive.com logo in svg

Canon Laser Class 700 Series, Reference Manual

Share
Download
Canon Laser Class 700 Series Reference Manual Download Page 69

Assembling the Machine

1-51

Bef

ore 

Y

ou Star

t Using 

This Machine

1

CF-PL Reference Guide_USEN HT1-2187-000-V.1.0

• When the date is displayed on the LCD display, the machine is in the Standby 

mode and ready for normal operation. If the Error lamp starts blinking red, wait for 
one of the following messages to appear.

Message

Description

INSTALL CARTRIDGE

You have not yet installed the toner cartridge. Install the FX7 
toner cartridge. (See “Installing the Toner Cartridge,” on p. 
1-35.)

REPLACE 
CARTRIDGE

The toner cartridge has run out of toner. Replace the toner 
cartridge.

CHECK PRINTER 
COVER

The printer cover is not closed completely. If it does not close 
easily, do not force it. Remove the toner cartridge, and insert it 
again. Make sure it is sitting level inside the main unit, and 
close the printer cover again.

SUPPLY REC. PAPER

At least one of the paper cassettes is empty or not seated 
correctly inside the machine. Remove each cassette. Make 
sure the stacks of paper are below the tabs, and insert the 
paper cassettes again. Push the paper cassettes all the way 
into the machine until they lock into place.

Summary of Contents for Laser Class 700 Series






























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands