manualshive.com logo in svg

Canon Laser Class 700 Series, Reference Manual

Share
Download
Canon Laser Class 700 Series Reference Manual Download Page 68

Assembling the Machine

1-50

1

Bef

ore 

Y

ou Star

t Using 

This Machine

CF-PL Reference Guide_USEN HT1-2187-000-V.1.0

Turning the Power ON

1

Connect the power cord to the power socket on the back of 
the main unit.

2

Connect the other end of the power cord to the power source.

After you connect the power cord to the power source, the LCD display turns ON.

CAUTION

The machine must be connected to a properly grounded, three-prong 120 V 
AC outlet.

NOTE
• There is no power switch on the main unit.

• The message below appears while it takes a few seconds for the machine to warm 

up.

• The machine has warmed up and is ready to use when you see the date and time 

displayed. Now the machine is in the Standby mode.

Summary of Contents for Laser Class 700 Series






























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands