Canon Laser Class 700 Series, Reference Manual

Page: 142 / 221

Setting Up and Using PIN Codes 4-24
Restr
icting the Use of the Machine
4
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Dialing with a PIN Code after the Number
If you set <NECESS. PIN CODE> of the PIN Code setting to ‘OFF’, you can
perform the procedure described below. (See “Setting a PIN Code,” on p. 4-22.)
1
Place your documents on the machine.
For instructions explaining how to place your documents on the machine, see
Chapter 3, “Sending Documents,” in the
Facsimile Guide .
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
Chapter 3, “Sending Documents,” in the Facsimile Guide .)
• You can also specify a sender’s name with [TTI Selector]. (See Chapter 3,
“Sending Documents,” in the Facsimile Guide .)
2
Enter the telephone number using the numeric keys.
3
Open all three one-touch speed dialing panels
➞
press
[Pin Code].
4
Press [Set].
NOTE
Repeat steps 2 to 4 for each telephone number in a sequential broadcast. In a
sequential broadcast, you must dial the second destination within five seconds of
dialing the first destination. All subsequent destinations must be specified within 10
seconds of each other. For details about sequential broadcasting, see Chapter 3,
“Sending Documents,” in the
Facsimile Guide .
4
1
7
5
2
8
6
3
9
0
Pin Code
Set