55
1.
2.
Remove the roll.
Load the new roll.
3.If no barcode was printed on the
roll, specify the paper type.
There is no more paper left on
the roll.
Follow the steps below to replace the
used roll with a new roll of the same
type and size.
The roll is empty.
Error Messages
Cause
Corrective Action
4.If no barcode was printed on the
roll, specify the paper length.
(→"Removing the Roll from the
Printer," User Manual)
(→"Removing a Roll from the Roll
Holder," User Manual)
(→P.11)
(→"Selecting the Paper Type
(Roll)," User Manual)
(→"Specifying the Paper Length
(Roll)," User Manual)
This type of paper is not
compatible with HP-GL/2.
The printer has received a HP-
GL/2 print job that cannot be
printed on the paper that has
been advanced.
Replace the paper with a type
compatible with HP-GL/2. For details
on paper compatible with HP-GL/2,
refer to the
Paper Reference Guide
.
(→"Types of Paper," User Manual)
GL2: Wxxxx The memory is
full.
(xxxx is 0501, 0903, or
0904)
The printer memory is full.
Because the entire print job could not
be received, the printer may not be
able to print the entire original. Check
the printing results.
GL2: W0502 The parameter
is out of range.
A parameter specified in a HP-
GL/2 command is out of the
supported range.
Check the print job.
The printer may continue printing, but
the printing quality may be affected.
Check the printing results.
GL2: W0504 This command
is not supported.
The printer has received
an unsupported HP-GL/2
command.
Check the print job.
