2
Lift the
Holder Stopper
lever (a) from the shaft side to unlock it. Holding the
Holder Stopper
at the position indicated (b), remove it from the
Roll Holder
.
3
With the edge of the roll paper facing back as shown, set the roll with the
Roll Holder
from the right. Insert the roll
fi
rmly until it touches the
fl
ange (a) of the
Roll Holder
.
Important
•
Insert the roll
fi
rmly so that there is no gap between the roll and the
fl
ange of the
Roll Holder
. If there is a gap, it may cause feeding problems.
•
Set the roll on a table or other
fl
at surface so that it does not roll or fall. Rolls are
heavy, and dropping a roll may cause injury.
•
When loading a roll, be careful to avoid hitting the printer hard with the roll. This
may damage the
Roll Holder
.
12
