Canon imageRUNNER ADVANCE C9065S PRO Operating Information Manual Download Page 352

Page: 352 / 456

Clean the wire

Introduction

If streaks appear on printed output or parts of the printed image are missing, clean the
corona assembly wires inside the main unit.

NOTE

• It takes approximately 35 seconds to clean the wires.
• Wire cleaning cannot be performed during printing.

Clean the wire

Touch 'System' -> 'Maintenance'.

Press 'Start maintenance'.

Touch 'Clean the corona wires' and touch 'Start' .
A wizard opens.

Press 'Next'.
A status message displays.

Press 'Finish'.

Touch 'Stop' to close the 'Maintenance tasks' menu.

Result

If the procedure displays an engine error, contact your local service representative.

Chapter 11 - Maintenance and calibration

352

Clean the wire

Summary of Contents for imageRUNNER ADVANCE C9065S PRO









































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C9065S PRO, Operating Information Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands