Canon imageRUNNER ADVANCE C9065S PRO Operating Information Manual Download Page 291

Page: 291 / 456

Set the left guide to A4/LTR, if necessary.

Gently push the paper tray back into the printer until it clicks into place in the closed
position.

CAUTION

When returning the paper drawer to its original position, be careful not to get
your fingers caught, as this may result in personal injury.

IMPORTANT

• Never place paper or any other items into the open part of the paper drawer next

to the paper stack. Doing so may cause a paper jam.

• When you are not loading tab paper, make sure to return the tab paper guide to

its holder.

• Using the tab paper guide for storing paper other than tab paper may cause a paper

jam.

Chapter 9 - Paper, toner, and staples

291

Load tab paper into the paper tray

Summary of Contents for imageRUNNER ADVANCE C9065S PRO









































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C9065S PRO, Operating Information Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands