Canon imageRUNNER ADVANCE C9065S PRO Operating Information Manual Download Page 27

Page: 27 / 456

Function

Component

Get immediate and always access to the 'Trays'
section on the operator panel to do the follow-
ing, for example:

• Check the content of all paper trays.
• Load a new media type into a paper tray.
• Change the media type which is available

in one of the paper trays.

Paper tray key

Use the USB port to:

• Connect the spectrophotometer and cali-

brate the printer and controller.

• Print a file from an USB drive
• Scan to a USB drive

USB port

Access the 'Schedule' view to manage the jobs
in the schedule.

'Schedule' button

Access all functions to print, copy and scan
your documents.

• Manage or change the settings of jobs in

the lists of 'Waiting jobs', 'Scheduled jobs'
and 'Printed jobs'.

• Carry out copy jobs and scan jobs.

'Jobs' button

Access the 'Trays' view on the operator panel
to do the following, for example:

• Check the content of all paper trays.
• Load a new media type into a paper tray,

• Change the media type which is available

in one of the paper trays.

'Trays' button

Chapter 2 - Main parts

The operator panel

Summary of Contents for imageRUNNER ADVANCE C9065S PRO









































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C9065S PRO, Operating Information Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C9065S PRO

Reviews:

Brands by name

Popular brands