Canon imageRUNNER ADVANCE C9065S PRO, Operating Information Manual

Page: 194 / 456

Feeding originals into the ADF
Introduction
Use the feeder when you want to copy several originals at the same time. The printer
automatically feeds the originals onto the glass plate and scans them. The size of the
original is automatically detected, and the document is scanned. The printer cannot always
detect the size of the original if it is nonstandard paper size, such as a book. In this case,
specify the size at which you want to scan the original. Two-sided originals can also be
scanned as two-sided documents. You can place the following originals into the ADF:
• Weight:
One-sided scanning: 38 to 220 g/m
2
/ 10 lb bond to 80 lb cover
Two-sided scanning: 50 to 220 g/m
2
/ 13 lb bond to 80 lb cover
(However, if you are scanning in color, 64 to 220 g/m
2
/ 17 lb bond to 80 lb cover
paper can be used for both 1-sided and 2-sided scanning)
• Size:
A3, B4, A4, A4R, B5, B5R, A5, A5R, and B6R
11" × 17", LGL, LTR, LTRR, STMT, or STMTR
• Tray Capacity:
300 sheets of paper (80 g/m
2
/ 20 lb bond)
#
IMPORTANT
• Thin originals may become creased, if used in a high temperature or high humid-
ity environment.
• Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals, originals with sharp folds, clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
• If the same original is fed through the feeder repeatedly, the original may fold or
become creased, and make feeding impossible. Limit repeated feeding to a maxi-
mum of 30 times (this number varies, depending on the type and quality of the
original).
• If the feeder rollers are dirty from scanning originals written in pencil, perform
the feeder cleaning procedure.
• Always smooth out any folds in your originals before placing them into the feeder.
Chapter 7 - Copy jobs 194
Feeding originals into the ADF