5- 48
List of Network Settings
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
List of Network Settings
If you are using a web browser (Remote UI), you can
change the network interface settings. The settings that can
be changed are described below.
General Settings
TCP/IP Settings
Item
Content
Initial Value
Device Name
Device Name
(Range: 0 to 32 chars.)
Blank
Location
Device location
(Range: 0 to 32 chars.)
Blank
Administrator
Name of Administrator for
the device
(Range: 0 to 32 chars.)
Blank
Phone
Telephone number of the
Administrator
(Range: 0 to 32 chars.)
Blank
Comment
(E-mail)
Administrator Comments
(Range: 0 to 32 chars.)
Blank
Administrator
Password
Device password
(Range: 0 to 15 chars.)
Blank
Item
Content
Initial Value
Set the Address
Using DHCP
Determines whether DHCP
is used to configure the IP
address
Off
Set the Address
Using BOOTP
Determines whether
BOOTP is used to configure
the IP address
Off
Set the Address
Using RARP
Determines whether RARP
is used to configure the IP
address
Off
RAW Mode Bi-
directional
Communication
Function
Determines whether bi-
directional communication
is used for RAW mode.
Off
Performs
Dynamic Update
of DNS
Determines Whether DNS
Server Registration Update
is Automatic.
Off
Using the
Zeroconf
Function
Determines whether
Zeroconf is used.
On
IP Address
The IP address of the printer
0.0.0.0
Subnet Mask
The subnet mask of the printer
0.0.0.0
Gateway
Address
The gateway address of the
printer.
0.0.0.0
Primary DNS
Server Address
IP address of the primary
DNS server
0.0.0.0
Secondary DNS
Server Address
IP address of the secondary
DNS server.
0.0.0.0
