Item
Details
Default Setting
Enable DNS Dynamic
Update
Activate this setting to perform DNS server registration automatically.
Off
Use Zeroconf Function
Activate this setting to use Bonjour.
On
IP Address
Specify the printer's IP address.
0.0.0.0
Subnet Mask
Specify the printer's subnet mask.
0.0.0.0
Gateway Address
Specify the printer's default gateway.
0.0.0.0
LPD Printing
Activate this setting to use LDP Printing.
On
IPP Printing
Activate this setting to use IPP Printing.
On
IPP Printer URI
Specify the URI of the printer used for IPP printing using up to 252 characters.
printer
RAW Printing
Activate this setting to use Raw Printing.
On
RAW Mode Bi-direc-
tion
Activate this setting to use Raw mode bidirectional communication.
Off
FTP Printing
Activate this setting to use FTP Printing.
On
Use Discovery
Activate this setting to use SLP Discovery function.
On
Scope
Enter the SLP search range.
default
SMTP Server Address
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
0.0.0.0
Primary DNS Server
Address
Specify the IP address of the primary DNS server.
0.0.0.0
Secondary DNS Server
Address
Specify the IP address of the secondary DNS server.
0.0.0.0
DNS Host Name
Specify the printer host name, up to 63 characters (1–63 characters). Use single-
byte letters, numbers, and
-
(hyphens). Do not use numbers or
-
for the first char-
acter or
-
for the last character.
NB-18GBipxxxxxx
DNS Domain Name
Specify the printer domain name, up to 63 characters. Use single-byte letters,
numbers,
-
(hyphens), and
.
(periods). Do not use numbers,
-
, or
.
for the first
character, or
-
or
.
for the last character.
blank
Multicast DNS Service
Name
Specify the printer's Multicast DNS service name. (1–63 characters)
This name will be displayed when Bonjour functions are used.
Canon iPFxxxx
(xxxxxx)
7
Click
OK
to display the
Network
page.
Note
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such protocol
running in the network.
•
If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is used
first. If you cannot obtain the IP address, the address specified in
IP Address
is used.
•
It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check boxes
of options you will not use.
•
If you are using a DNS server, select
Enable DNS Dynamic Update
and enter the IP Address for DNS servers and DNS
domain name in
Primary DNS Server Address
,
Secondary DNS Server Address
and
DNS Domain Name
, respectively.
When using an IPv6 IP address
1
Start the web browser and enter the following URL in the
Location
(or
Address
) box to display the RemoteUI
page.
http://
printer IP address or name
/
Example: http://xxx.xxx.xxx.xxx/
Configuring the Printer's TCP/IP Network Settings With RemoteUI
iPF765
User's Guide
Network Setting
Initial Settings
542
Summary of Contents for imagePROGRAF iPF765
