Canon imagePRESS Server G250 V2, Service Manual

Page: 8 / 99

Introduction
This document includes information about servicing the imagePRESS Server G250 V2.0 .
In this document, imagePRESS Server G250 V2.0 is referred to as the “ imagePRESS Server .”
About the imagePRESS Server
The imagePRESS Server embeds computer connectivity and highly efficient PostScript and PCL printing capacity into the
imagePRESS C910/C810/C710CA .
With the imagePRESS Server , customers can use the printer as a PostScript and PCL printer, and scanner, and it provides
efficient image processing and printing controls. Once it is connected to the printer through a network, customers can print to the
imagePRESS Server from supported client computers on the network (Windows or Mac, or a UNIX workstation running TCP/IP).
The imagePRESS Server ships with system software pre-installed so that customers can use the imagePRESS Server
immediately. However, as part of servicing the imagePRESS Server , you may need to reinstall system software.
Figure 1: imagePRESS Server
About this document
This service document describes how to install imagePRESS Server system software, and how to service the imagePRESS
Server hardware. It is not intended for customer use. Information about the printer, network, remote computers, software
applications, and imagePRESS Server operating system is not included in this document.
Illustrations
In this document, illustrations reflect the version of the imagePRESS Server being shipped at the time of publication.
Components in illustrations are subject to change. For information about imagePRESS Server components that do not match
illustrations in this document, contact your authorized service/support center.
Terms
In this document, the following terms are used.
Replace:
Refers to reinstallation of existing components. Do not install new components unless necessary.
Printer touch panel:
Refers to the printer user interface that is used to run the Fiery setup.
Linux:
This is the operating system of the imagePRESS Server .
System software:
The software installed on the hard disk drive (HDD) of the imagePRESS Server . Includes Linux operating system software.
1. Introduction
2