• Do not use an extension cord.
Do not have liquids near the
imagePRESS Server
If liquid spills on the
imagePRESS Server
, immediately unplug the
imagePRESS Server
.
Do not open the power supply
For more information about the power supply, see
.
Do not open the hard disk drive
For more information about the hard disk drive, see
“Hard disk drive (HDD)” on page 41
.
Use caution with sharp edges
The edges of some
imagePRESS Server
components are sharp.
Power supply cord notice
IMPORTANT:
The power supply cord is used as the main disconnect device. Ensure that the power outlet is located/installed near the
equipment and is easily accessible.
Lithium battery notice
CAUTION:
There is a danger of explosion if the battery is replaced with an incorrect type. Replace a battery only with the same type
recommended by the manufacturer. Dispose of used batteries according to local regulations.
Short circuit protection
WARNING:
This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker
no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying
conductors).
1. Introduction
6
Summary of Contents for imagePRESS Server G250 V2
