Canon imagePRESS C800 Series Operation Manual Download Page 218

Page: 218 / 315

Action

Clean the thin glass strip of the scan area.
Then, wipe dry with a clean, dry cloth.

Close the inside cover (1), the document scan
cover (2) and the automatic document feeder
(3).

CAUTION

• When you close the covers and

the automatic document feeder,
be careful not to get your fingers
caught. This can cause personal
injury.

• Be aware that the light emitted

from the glass plate can be very
bright when you close the auto‐
matic document feeder.

Clean the automatic document feeder scanning area

218

Chapter 7 - Maintain the print system

imagePRESS C800 Series

Summary of Contents for imagePRESS C800 Series




























































































































































































































































































































Search results

Summary of Contents for imagePRESS C800 Series

Reviews:

Brands by name

Popular brands

Canon imagePRESS C800 Series, Operation Manual

Search results

Summary of Contents for imagePRESS C800 Series

Reviews:

Brands by name

Popular brands