manualshive.com logo in svg

Canon imagePRESS C800 Series, Operation Manual

Share
Download
Canon imagePRESS C800 Series Operation Manual Download Page 128

Check the filling level of the staple cartridge

The dashboard at the top of the control panel and the operation attention light warn you when a
staple cartridges becomes empty. The color of the icon indicates the status of a staple cartridge.
• A blue icon indicates that the staple cartridges contains sufficient staples.
• An orange icon indicates that at least one staple cartridge is almost empty.
• A red icon indicates that at least one staple cartridge is empty.

Touch a staple cartridge indicator or go to the System view to see the filling levels of the staple
cartridges.

[75] Staple cartridge indicators

For more information, see:

Schedule on page 122

System monitoring on page 120

Replace the staple cartridge in the stapler unit on page 199

Replace the staple cartridge in the saddle stitch unit on page 201

Procedure

1.

Touch the indicator or go to [System] -> [Printer].

2.

Check the filling level in the [Finishers] pane.

Check the filling level of the staple cartridge

128

Chapter 5 - Print the jobs

imagePRESS C800 Series

Summary of Contents for imagePRESS C800 Series




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands