manualshive.com logo in svg

Canon imagePRESS C800 Series, Operation Manual

Share
Download
Canon imagePRESS C800 Series Operation Manual Download Page 150

 

Action

 

2

Lift up the envelope guide straight from its
holder.

3

Attach the envelope guide as shown in the il-
lustration.

4

Load one envelope against the right-hand side
of the paper tray.
Envelope orientation 1: Nagagata 3, Kakugata
2
Envelope orientation 2: No. 10 (COM10), ISO-
C5, DL, Monarch, Yougatanaga 3

[87] Envelope orientation 1

[88] Envelope orientation 2

5

Squeeze the top of the front guide and slide
the guides towards, and against, the envelope
(1 and 2).

IMPORTANT

Slide the guides until they click into
place to prevent a paper jam, poor
print quality, or dirty machine parts.

6

Load all envelopes.

IMPORTANT

• Make sure that the height of the stack does not exceed approximately 33.5

mm / 1.3" (approximately 50 envelopes).

• Make sure that the height of the envelope stack does not exceed the enve-

lope loading limit mark (

).

7

Gently close the paper tray and make sure it clicks into place.

CAUTION

When you close the paper tray, be careful not to get your fingers caught. This
can cause personal injury.

8

Return the envelope guide to its holder when the job is ready.

Load envelopes into the internal paper trays

150

Chapter 5 - Print the jobs

imagePRESS C800 Series

Summary of Contents for imagePRESS C800 Series




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands