manualshive.com logo in svg

Canon imagePRESS C800 Series, Operation Manual

Share
Download
Canon imagePRESS C800 Series Operation Manual Download Page 193

Refill toner and staples

Replace a toner cartridge

The dashboard of the control panel indicates if a toner cartridge needs replacing. Toner cartridges
come in four colors: black, cyan, magenta, and yellow. You find the toner cartridges in the print
module.

When a toner cartridge becomes empty during a print job, the print process resumes after you
replace the toner cartridge.

[105] Location of the toner cartridges

WARNING

• Do not burn or throw used toner cartridges into open flames. This can cause toner ignition,

which may result in burns or a fire.

• Do not store toner cartridges in places that are exposed to open flames. This can cause toner

ignition, which may result in burns or a fire.

• If toner gets onto your hands or clothing, immediately wash it off with cold water. Warm

water will set the toner. If this happens, it will become impossible to remove the toner
stains.

CAUTION

• Keep toner out of the reach of small children.
• If toner is ingested, consult a physician immediately.

IMPORTANT

• For information about Canon genuine toner, see 

Consumables on page 185

.

•

Be careful with counterfeit toners.

Be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner
can result in poor print quality or machine performance. Canon is not responsible for any
malfunction, accident or damage caused by the use of counterfeit toner. For more information,
see http://www.canon.com/counterfeit.

• Do not replace toner cartridges until a message appears informing you that you must replace a

toner cartridge.

• You can replace a toner cartridge while the print system is busy.
• The color of the toner cartridge that needs to be replaced is displayed on the control panel. If

multiple toner cartridges need to be replaced, replace the toner cartridges in the following
order: black, yellow, magenta, cyan.

• Wait to replace color toner cartridges when you want to continue copying or printing in black &

white. Replace the color cartridge after the jobs are ready.

Refill toner and staples

Chapter 7 - Maintain the print system

193

imagePRESS C800 Series

Summary of Contents for imagePRESS C800 Series




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands