1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-21
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Redialing Automatically
The default settings are as follows:
AUTO REDIAL: <ON>
REDIAL TIMES: <2TIMES>
REDIAL INTERVAL: <2MIN.>
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <TX SETTINGS>,
then press [OK].
4.
Press
[
] or [
] to select <AUTO REDIAL>,
then press [OK].
5.
Press
[
] or [
] to select <ON>, then press
[OK].
6.
Press
[
] or [
] to select <REDIAL TIMES>,
then press [OK].
7.
Use
[
] or [
], or the numeric keys to enter
the number of redials the machine will make,
then press [OK].
8.
Press
[
] or [
] to select <REDIAL
INTERVAL>, then press [OK].
9.
Use
[
] or [
], or the numeric keys to enter
the time (in minutes) between redials, then
press [OK].
–
–
–
10.
Press [
] or [
] to select <TX ERROR
REDIAL>, then press [OK].
11.
Press [
] or [
] to select <ON> or <OFF>,
then [OK].
<ON>: Resends all documents once if final transmission made by
automatic redialing is interrupted.
<OFF>: Does not redial when final transmission is interrupted.
12.
Press [Stop] to return to the standby mode.
Checking Dialing Line
Checking dialing line function enables you to configure the setting
on whether to check for a dial tone.
The default setting is <OFF>.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <TX SETTINGS>,
then press [OK].
4.
Press
[
] or [
] to select <DIALING LINE
CHCK>, then press [OK].
5.
Press
[
] or [
] to select <ON>, then press
[OK].
6.
Press [Stop] to return to the standby mode.
■
