Canon Finisher-AB1, Service Manual

Page: 330 / 463

Chapter 4
4-36
4) Disconnect the 11 connector [1], and detach the
cable from the guide.
F-4-138
5) Disconnect the 2 connectors [1], and free the cable
from the 3 clamps [2] and the 3 edge saddles [3].
F-4-139
6) Remove the 2 clamps [1], and disconnect the
connector [2].
F-4-140
7) Remove the stop unit [1].
- 4 screws [2]
F-4-141
4.4.13 Thrust Plate
4.4.13.1 Before Removing the Stop Plate
0015-2184
1) Remove the stop unit. (page 4-
35) Reference[Removing the Stop Unit]
4.4.13.2 Removing the Stop Plate
0015-2185
1) Turn the gear [1] in the direction of the arrow [A]
so that the stop plate [2] is extended as far as
possible.
F-4-142
[1]
[1]
[1]
[3]
[3]
[2]
[1]
[3]
[2]
[2]
[1]
[2]
[1]
[2]
[2]
[1]
[2]
[A]