Canon Finisher-AB1, Service Manual

Page: 29 / 463

Chapter 2
2-12
3) For Finisher AB1, detach the caster front cover.
- 1 screw [2]
F-2-30
4) For Saddle Finisher, detach the saddle inner cover
(lower) [1].
- 1 screw [2]
- 1 knob [3]
- 3 screws [4]
F-2-31
5) Detach 2 caster covers [1] on the left side of the
equipment. (Figure shows Saddle Finisher.)
- 2 screws [2]
F-2-32
6) Measure the height [A] from the floor to the
bottom of the machine to check the figure is in the
range of 84.6+ -0.5mm.
F-2-33
7) Loosen the fixing nut [1] with the wrench [2] in
the direction of [A].
F-2-34
[1]
[2]
[1]
[2] [3]
[4]
[4]
[2]
[1]
84.6 0.5mm
[A]
[1]
[2]
[A]