Canon Finisher-AB1, Service Manual

Page: 127 / 463

Chapter 5
5-21
6) Press the push switch SW385 [1] to start
adjustment of the stapling position (front 1-
point).
F-5-64
7) Press the push switch SW383 [1] or SW382 [3] to
store the new adjustment value.
A press on SW383 causes the LED [3] to
indicate '-1', moving the stapling position (front
1-point) toward the rear. On the other hand, a
press on SW384 causes the LED [3] to indicate
'+1', moving the stapling position toward the
front.
range of adjustment: +20 to -20 (unit: 0.5 mm)
F-5-65
8) Press the push switch SW385 [1] to move the
stapler toward the front.
F-5-66
9) Place A4 paper [1] in the intermediate handling
tray. (Be sure to butt the paper against the rear of
the handling tray.)
F-5-67
SW382
SW381
SW383
(-) (+) ENTER
SW384 SW385
DSP381
[1]
SW382
SW381
SW383
(-) (+) ENTER
SW384 SW385
DSP381
[1] [2]
[3]
SW382
SW381
SW383
(-) (+) ENTER
SW384 SW385
DSP381
[1]
[1]