Canon FAX L290, User Manual, Page: 97 / 229

Chapter 7 Sending Faxes
7-13
Sending F
a
x
e
s
n
• You can enter the fax numbers
in any order.
• If you enter a wrong destination,
press Clear , then enter the
correct destination.
• You must enter the second
destination within five seconds of
entering the first one. All
subsequent destinations must be
entered within 10 seconds. If you
wait longer than these times, the
FAX automatically begins
scanning the document for
sending. If you do not want the
FAX to begin scanning
automatically after a few
seconds, disable the
TIME OUT
setting (
1
p. 14-6).
• To review the destinations
entered, use
∂
or
¨
to scroll
through the numbers.
3
Press Start/Copy to begin scanning
for sending, or wait a few seconds for
the FAX to begin scanning
automatically.
• The FAX will first send the document to
the one-touch speed dialling
destinations, then the coded speed
dialling destinations, and finally to the
destination dialled using regular dialling.
• If you do not want the FAX to begin
scanning automatically after a few
seconds, disable the
TIME OUT setting
(
1
p. 14-6).
• To cancel sending once dialling has
started, press Stop then
T
. Sending to
all destinations you specified in step 2
will be cancelled. (You cannot cancel
only one destination.)
n
• If a number is busy, the FAX will continue sending to the other destinations and then
automatically redial the number that was busy.
• If the FAX’s memory becomes full while scanning your document,
MEMORY FULL
will
appear in the LCD. If this happens, remove the remainder of the document from the ADF
(you may need to open the operation panel to do so), then divide the document into
several sections and send each section separately.