Canon FAX L290, User Manual, Page: 107 / 229

Chapter 8 Receiving Faxes
8-5
Receiving F
a
x
e
s
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your FAX to automatically switch between fax and voice calls.
n
For this mode, you need to connect the optional handset or a telephone to your FAX
(
1
p. 2-6).
Setting Fax/Tel Mode
Follow this procedure to set the receive mode to
FAX/TEL AUTO SW
(
Fax/Tel Mode
):
1
Open the one-touch speed dial panel.
2
Press Data Registration .
3
Press Set .
4
Use
∂
or
¨
to select
RX SETTINGS
.
5
Press Set .
6
Use
∂
or
¨
to select RX MODE .
7
Press Set .
Ex:
8
Use
∂
or
¨
to select
FAX/TEL
AUTO SW
.
9
Press Set .
• To set the options for
FAX/TEL AUTO
SW
(
Fax/Tel Mode
), see the following
pages.
10
Press Stop to return to standby mode.
Ex:
11
Confirm that
FaxTel
is displayed in
Ex:
the LCD.
• If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode . After a
few seconds, the LCD returns to
standby mode.
15:00 FaxTel
15:00 FaxTel
RING START TIME
FAX/TEL AUTO SW
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION