manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 167 / 229

Share
Download
Canon FAX L290 User Manual Download Page 167

Chapter 13

Troubleshooting

13-11

T

roub

leshooting

MEMORY USED 

nn

%

NO RX PAPER

NO TEL #

NOT AVAILABLE

PSWD POLL REJECT

PSWD TX REJECTED

—

#012

#022

—

#084

#081

Shows the percentage 
of memory currently 
in use.

The other party’s fax
machine is out of paper
or its memory is full.

The one-touch speed
dialling button or coded
speed dialling code you
entered has not been
registered.

You entered an invalid
number.

You attempted to poll a
fax machine with a
password, but the other
party has not set a
password or their fax
machine does not
support polling with a
password.

You attempted to send a
document with a
password, but the other
party’s fax machine does
not support reception
with a password.

If you need more space,
wait for the unit to send
any faxes. Also, print, send,
or delete any documents in
memory you no longer
need (

1

p. 9-5).

Contact the other party and
have them load paper in
their fax machine or free
up space in their fax
machine’s memory.

Register the one-touch
speed dialling button or
coded speed dialling code
(

1

Chapter 6).

Enter a valid number.

Contact the other party to
check their settings. If their
fax machine does not
support polling with a
password, delete the
password you have
registered (

1

pp. 6-3, 6-8,

6-10).

Contact the other party to
check their settings. If their
fax machine does not
support reception with a
password, delete the
password you have
registered (

1

pp. 6-3, 6-8).

Message

Error Code Cause

Action

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments