manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 57 / 229

Share
Download
Canon FAX L290 User Manual Download Page 57

Chapter 5

Paper Handling

5-5

P

aper Handling

■

Selecting Paper Delivery

Before selecting paper delivery, be sure to take note of the following:

• Always set the paper delivery selector before printing (

1

below).

• Changing paper delivery while the unit is printing will cause problems. Wait for the

printout to exit the unit completely before changing paper delivery.

• The face-down delivery slot can hold up to approximately 50 sheets of paper. To

prevent paper jams, remove paper from this slot before the count reaches 50.

• Make sure there is enough room for the paper to exit from the face-up delivery slot.

Remove each sheet as it is delivered from this slot.

• Never pull the paper as it comes out of the unit.

Choose paper delivery according to the task you are performing.

Select face-up or face-down delivery with the paper delivery selector.

c

When using face-up delivery, you must remove each sheet as it is delivered.
Failure to do this may cause jams in the face-up delivery slot and result in damage
to your unit.

FACE-DOWN 
DELIVERY (

D

)

FACE-UP
DELIVERY (

U

)

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments