Canon FAX L290 User Manual Download Page 187

Page: 187 / 229

Chapter 14

Summary of Settings

14-9

Summar

y of

Settings

SETUP FILE

FILE NAME

PASSWORD

TX PASSWORD

ERASE AFTER TX

CHANGE DATA

PASSWORD

DELETE FILE

PASSWORD

Sets up the polling box to hold a document to be polled
(

p. 9-12).

Enters the name for the polling box.

Enters a password to restrict access to the polling box
settings.

Enters a standard ITU-T password.

Selects whether the document is deleted from memory
once it is polled, or continues to be stored in memory.

: Document is deleted from memory after it is polled.

OFF

: Document remains in memory after it is polled.

Changes the polling box settings (

p. 9-15).

Enters the password (if registered) to access the
polling box settings.

Deletes the polling box settings (

p. 9-15).

Enters the password (if registered) to access the
polling box settings.

–

0000

9999

–

ON
OFF

–

POLLING BOX Menu

For details on accessing the settings below, see p. 14-3.

The selectable settings and the default settings vary depending on the country where you
have purchased the FAX. The values shown here are average values.
For the default settings for your FAX, see Appendix B.

Setting

Description

Sub-Settings

Summary of Contents for FAX L290






































































































































































































































Search results

Summary of Contents for FAX L290

Reviews:

Canon FAX L290, User Manual, Page: 187 / 229

Search results

Summary of Contents for FAX L290

Reviews: