manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 88 / 229

Share
Download
Canon FAX L290 User Manual Download Page 88

7-4

Sending Faxes

Chapter 7

Dialling Methods

There are several ways of dialling the fax number(s) you want to send to. They are as
follows:

• Regular Dialling

Dial a fax number by using the numeric buttons, similar to dialling a telephone
number.

• One-Touch Speed Dialling

Dial a fax number by pressing the one-touch speed dialling button (01 to 24) assigned
to the fax number. For details on registering and using one-touch speed dialling, 
see pp. 6-3, 6-16.

• Coded Speed Dialling

Dial a fax number by pressing 

Coded Dial

and entering the two-digit code (00 to 99)

assigned to the fax number. For details on registering and using coded speed dialling,
see pp. 6-8, 6-16.

• Group Dialling

Send a document to a predefined group of fax numbers registered for speed dialling.
For details on registering groups and using group dialling, see pp. 6-13, 6-16.

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments