manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 210 / 229

Share
Download
Canon FAX L290 User Manual Download Page 210

D-2

Options

Appendix D

Optional Handset*

An optional handset is available in certain countries for connection to your FAX. Contact
your local authorised Canon dealer for more information on purchasing this option.

n

Please note that the shape of your handset may differ from the one shown in this section.
However, both handsets have exactly the same functions and performance.

Package Contents

Make sure your handset package includes the following items:

If any items are damaged or missing, notify your local authorised Canon dealer or the
Canon help line immediately.

HANDSET

HANDSET CRADLE

SCREWS WITH PLUGS (2)

SCREWS
(Not used with your FAX.)

RINGER VOLUME SWITCH
Use a pen or other pointed 
object to select the ring 
volume of the handset 
(HI, LO, or OFF).

*

The

optional handset is available for certain countries only.

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments