manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 159 / 229

Share
Download
Canon FAX L290 User Manual Download Page 159

Chapter 13

Troubleshooting

13-3

T

roub

leshooting

Paper Jams

When paper jams in the FAX, the LCD displays 

CLEAR PAPER JAM

. Try clearing the

jam by following the procedure in 

Jams in the Paper Delivery Slots

below. If this does

not clear the jam, follow the procedure in 

Jams Inside the Unit

.

Jams in the Paper Delivery Slots

Follow this procedure to clear a paper jam in the paper delivery slots:

n

You do not need to unplug the FAX when clearing paper jams.

1

Gently pull any jammed paper out of
the unit as shown.

2

Remove the paper stack from the
multi-purpose tray and reload it 
(

1

p. 2-16).

n

If the paper jam occurred while a fax was being received into the FAX’s memory, that fax
will print automatically when the jam is cleared.

Jams Inside the Unit

Follow this procedure to clear a paper jam inside the unit:

n

You do not need to unplug the FAX when clearing paper jams.

1

Lift the latch and open the front cover.

c

Do not open the front cover
without lifting the latch since this
may damage your unit.

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments