manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 168 / 229

Share
Download
Canon FAX L290 User Manual Download Page 168

13-12

Troubleshooting

Chapter 13

REC’D IN MEMORY

SELECT POL REJCT

SUBADD TX REJECT

TX/RX CANCELLED

TX/RX NO. 

nnnn

TX/RX NO. 

nnnn

SCANNING P

.nnn

MEMORY FULL

(Three messages toggle.)

—

#082

#080

—

—

—

The unit received the fax
in memory because
paper or toner ran out, or
a paper jam occurred
during reception.

You attempted to poll a
fax machine with a
subaddress, but the other
party has not set a
subaddress or their fax
machine does not
support polling with a
subaddress.

You attempted to send a
document with a
subaddress, but the other
party’s fax machine does
not support reception
with a subaddress.

You pressed 

Stop

to

cancel a transaction.

The number shown
(

nnnn

) is a unique

identification number
assigned to the
document you are
sending or receiving.

The unit is sending a
document and its
memory is full.

Load paper in the multi-
purpose tray (

1

p. 2-16),

replace the toner cartridge
(

1

p. 12-7), or clear the

paper jam (

1

p. 13-3).

Contact the other party to
check their settings. If their
fax machine does not
support polling with a
subaddress, delete the
subaddress you have
registered (

1

pp. 6-3, 6-8,

9-10).

Contact the other party to
check their settings. If their
fax machine does not
support reception with a
subaddress, delete the
subaddress you have
registered (

1

pp. 6-3, 6-8).

—

This number appears in
reports so you can identify
transactions. Write the
number down if you will
need it later.

The unit continues to send
the document as memory
becomes available.

Message

Error Code Cause

Action

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments