Canon FAX L290 User Manual Download Page 101

Page: 101 / 229

Chapter 7

Sending Faxes

7-17

Sending F

Deleting a Document Set for Delayed Sending

Follow this procedure to delete a document stored in memory for delayed sending:

Open the one-touch speed dial panel.

Press

Delayed Transmission

Use

∂

to select

DELETE FILE

Press

Set

Ex:

Use

∂

to select the transaction

Ex:

number (

TX/RX NO.

) of the

document you want to delete.

• If you are unsure of the transaction

number (

TX/RX NO.

), print the DOC.

MEMORY LIST (

p. 9-5).

• A “

” before the transaction number

(

TX/RX NO.

) indicates that that

document is being sent at that moment.
If you want to delete a document being
sent, follow the instructions in the LCD.

• Use

to display details of the

transaction (e.g. destination).

Press

Set

Press

to delete the document.

• If you change your mind and want to

keep the document in memory for
delayed sending, press

To continue deleting other documents
set for delayed sending, repeat the
procedure from step 5.
-or-
Press

Stop

to return to standby mode.

Ex:

15:00

FaxOnly

ERASING END

YES=(

) NO=(#)

OK TO DELETE?

TX/RX NO. #0003

TX/RX NO.

0001

DELETE FILE

Summary of Contents for FAX L290






































































































































































































































Search results

Summary of Contents for FAX L290

Reviews:

Canon FAX L290, User Manual, Page: 101 / 229

Search results

Summary of Contents for FAX L290

Reviews: