Canon FAX L290 User Manual Download Page 151

Page: 151 / 229

Chapter 12

Maintenance

12-5

Maintenance

Cleaning the Scanner Components

Follow this procedure to periodically check and clean the scanner components:

Disconnect the power cord from the FAX.

Use both hands to gently open the
operation panel.

• It only opens partially.

While holding the operation panel
open, clean these components:

❚

Separation guide and separation
roller:

Wipe with a clean, soft, dry, lint-free
cloth.

❚

White sheet and scanning glass:

Wipe with a clean, soft, lint-free cloth
moistened with water, then wipe with
a clean, soft, dry, lint-free cloth.

• If the scanner components are

dirty, the documents you send or
copy will also be dirty.

• Be sure to use a soft cloth to

avoid scratching the
components.

• Do not use tissue paper, paper

towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.

Clean the underside of the operation
panel (shaded area in the illustration).

• Dirt and dust particles that collect on the

underside of the operation panel affect
the quality of the documents you copy
or send.

SCANNING GLASS

WHITE SHEET

SEPARATION GUIDE

SEPARATION
ROLLER

Summary of Contents for FAX L290






































































































































































































































Search results

Summary of Contents for FAX L290

Reviews:

Canon FAX L290, User Manual, Page: 151 / 229

Search results

Summary of Contents for FAX L290

Reviews: