manualshive.com logo in svg

Canon FAX L290, User Manual, Page: 142 / 229

Share
Download
Canon FAX L290 User Manual Download Page 142

11-2

Reports and Lists

Chapter 11

Summary of Reports and Lists

The table below shows the lists and reports that can be printed from your FAX. Refer to
the pages indicated for more details.

Report or List

USER’S DATA LIST

ACTIVITY REPORT

TX (Transmission) REPORT

RX (Reception) REPORT

MULTI TX/RX (Transaction)
REPORT

DOC. MEMORY LIST

MEMORY CLEAR REPORT

1-TOUCH SPD DIAL LIST 1
1-TOUCH SPD DIAL LIST 2

CODED SPEED DIAL LIST 1
CODED SPEED DIAL LIST 2

GROUP DIAL LIST

Description

Lists the current settings of your FAX and the
registered sender information.

Shows recent facsimile transactions performed
by your FAX.
You can enable or disable automatic printing 
of this report after every 20 transactions. You
can also manually set the FAX to print it.

Prints after transmission of a document.
You can enable or disable this feature, or set
the FAX to print a report only when an error
occurs.
You can also set the FAX to print the first page
of the document under the report to remind
you of the contents of the document.

Prints after reception of a document. You 
can enable or disable this feature, or set 
the FAX to print a report only when 
an error occurs.

Prints after sending the same document to
several fax numbers, or after polling multiple
fax numbers in one operation.

Lists the documents currently stored in the
FAX’s memory.

Prints automatically when power is restored 
to the FAX after a power cut. Lists the
documents deleted from memory.

Lists the numbers and names registered 
under one-touch speed dialling buttons.

Lists the numbers and names registered 
under coded speed dialling codes.

Lists groups registered under one-touch 
speed dialling buttons and coded speed 
dialling codes.

Details

p. 14-2

p. 11-3
p. 14-5

p. 11-4
p. 14-5

p. 11-5
p. 14-5

p. 11-5

p. 9-5

p. 13-22

p. 6-19

p. 6-20

p. 6-21

Summary of Contents for FAX L290






































































































































































































































Reviews:

No comments