Canon EOS C300 Mark II, Instruction Manual

Page: 185 / 223

185
Menu Options
[Rec Command] ( mode only): When you connect the camera to an external recorder, if you start or stop
recording with the camera, the other device will also start or stop recording.
• To output the recording command from the HDMI OUT terminal, you need to set both [Rec Command] to [On]
and also [
3
Recording/Media Setup]
>
[HDMI Time Code] to [On] to output simultaneously the time code
and recording command.
[
¢
Picture/Terminals Setup] menu
Menu item Submenu Setting options
A
[Select Monitoring Devices] [MON.+HDMI+LCD(VF)], [MON.+HDMI+VF], [LCD+VF] –
mode:
[MON. Terminal]
mode:
[REC OUT/MON. Terminal]
[Output] mode:
[4K RAW Priority], [2048x1080/1920x1080], [1920x1080] , [Off]
mode:
[2048x1080/1920x1080], [1920x1080] , [Off]
164
[OSD Output (2K)] [On] , [Off] 168
[3G-SDI Mapping] [Level A], [Level B] 164
[GENLOCK/SYNC OUT Term.] [Select] [HD Sync Output], [Genlock Input] 93,
95
[Genlock Adjustment] –1023 to +1023 (000) , [Set] 93
[SYNC Scan Mode] [P] , [PsF] 95
[Time Code] [Mode] [Preset] , [Regen.] 88
[Run] [Rec Run] , [Free Run] 88
[DF/NDF] [DF] , [NDF] 89
[Setting] [00:00:00:00] to [23:59:59:29], [Set], [Reset] 89
[TC In/Out] [In] , [Out] 93,
95
[User Bit] [Recording Mode] [Internal] , [External] 94
[Type] [Setting] , [Time], [Date] 91
[LCD Setup] [Brightness] -99 to 99 (±0)
41
[Contrast] -99 to 99 (±0)
[Color] -20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Backlight] [Normal] , [+1], [+2]
[Viewfinder Setup] [Brightness] -99 to 99 (±0)
41
[Contrast] -99 to 99 (±0)
[Color] -20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Luminance] [Normal] , [High]
[Eye Sensor] [On] , [Off] –
[Panel Luminance] 1 to 5 (3) –
[DISP. Button Levels] [All Displays] [On] , [Off]
58
[Surrounding Icons] [On] , [Off]
[Markers] [On] , [Off]
[No Displays] [On] , [Off]