Canon EOS C300 Mark II, Instruction Manual

Page: 135 / 223

135
Custom Picture Settings
* [
/
Custom Picture]
>
[Preset].
**Only when [
3
Recording/Media Setup]
>
[REC OUT 4K RAW Mode] is set to a setting other than [4K RAW].
NOTES
• About the logarithmic gamma curves Canon Log/Canon Log 2
These gamma curves assume the need for post-production processing. They were designed to make the
most of the imaging sensor characteristics in order to obtain impressive levels of dynamic range.
- In
mode, you can apply a LUT to the LCD screen and viewfinder and to video output from the REC
OUT terminal or the MON. and HDMI OUT terminals to use gamma curve/color space settings more suitable
for viewing on a monitor screen.
- There are also other LUTs available that can be applied for processing in post-production. For the latest
information on available LUTs, please visit your local Canon Web site.
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- If a protected custom picture file is selected on the camera, custom picture related settings cannot be
changed using the remote controller.
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file. If you want to keep an important custom picture file, copy it
in advance to an SD card or select in advance a custom picture file you do not mind changing.
Editing a Custom Picture File’s Settings
1 Select a custom picture file (
A
134).
2 Open the [Preset] submenu.
[
/
Custom Picture]
>
[Preset]
3 Select the desired option and then press SET.
• To use preset picture settings: Select the desired preset setting
(
A
134) and skip to step 6.
To select the main settings individually: Select [Off] and continue to
step 4.
4 Open the [Main Settings] submenu.
[
/
Custom Picture]
>
[Main Settings]
5 Select [Gamma], select the desired gamma curve and then press
SET.
• Select [Color Space] to select the color space, and/or [Color Matrix]
to select the color matrix in the same way.
6 To change the other detailed settings, open the [Other Settings]
submenu.
[
/
Custom Picture]
>
[Other Settings]
7 Select [Activate], select [On] and then press SET to activate the custom picture file’s other settings.
[Canon Log]** [Canon Log] [BT.709 Gamut]
[Cinema EOS
Original]
This setting uses Canon Log gamma and presumes a
workflow that includes post-production processing.
It can obtain an impressive dynamic range and color tones
appropriate for post-production.
[BT.2020]** [Wide DR] [BT.2020 Gamut] [Neutral] These settings produce the widest dynamic range possible
without requiring post-production. The color space can be
selected from 2 options.
[BT.709]** [Wide DR] [BT.709 Gamut] [Neutral]
[Preset]*
[
/
Custom Picture]
>
[Main Settings] settings
Characteristics
[Gamma] [Color Space] [Color Matrix]
[
/
Custom Picture]
[Preset]
[BT.709]
[
/
Custom Picture]
[Main Settings]
[Gamma] ….. [Wide DR]
[Color Space] …..
[BT.709 Gamut]
[Color Matrix] ….. [Neutral]