Canon EOS C300 Mark II, Instruction Manual

Page: 154 / 223

Clip Operations
154
Displaying the Lens Information and User Memo
From the [Clip Info] screen, push the joystick up or turn the SELECT dial up to display the [Lens &
Q
] screen.
In this screen you can check details about the lens used to record the clip. If the clip has an embedded user
memo, you will see the user memo content in this screen as well. Push the joystick up or turn the SELECT dial
up to return to the [Clip Info] screen.
Displaying Custom Picture Settings
When displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystick
down or turn the SELECT dial down to display the first of four screens with the clip’s custom picture settings
([
/
Data 1/4] screen). Push the joystick down or turn the SELECT dial down to display the other three [
/
Data]
screens [Lens &
Q
] screen [Clip Info] screen.
Adding
$
Marks or
%
Marks
If you add an OK mark (
$
) or check mark (
%
) to primary clips recorded on a CFast card, you can later display
an index screen that shows only the clips with an
$
mark or only the clips with a
%
mark. Furthermore, you
cannot delete clips with an
$
mark so you can use this mark also to protect important clips.
Adding an
$
Mark or
%
Mark during Playback
To add an OK mark (
$
) or check mark (
%
) to a clip during playback or playback pause, you must first set an
assignable button to [Add
$
Mark] or [Add
%
Mark] in advance.
1 Set an assignable button to [Add
$
Mark] or [Add
%
Mark] (
A
131).
• To add both types of clip marks (to different clips), set one assignable button to [Add
$
Mark] and another
assignable button to [Add
%
Mark].
2 Open the clip index screen for primary clips and select the desired clip.
3 During playback or playback pause, press the assignable button to add the clip mark.
• A message indicating the clip mark will appear and the selected clip mark will be added to the clip.
• Adding a clip mark to a clip during playback will pause the playback.
Adding an
$
Mark or
%
Mark from the Index Screen
1 Open the clip index screen for primary clips, select the desired clip and then press SET to open the clip menu.
2 Select [Add
$
Mark] or [Add
%
Mark] and then press SET.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press SET.
• The screen changes back to the clip index screen and an
$
mark or
%
appears next to the selected clip’s
thumbnail.
• Select [Cancel] instead to cancel the operation.
NOTES
• A clip cannot have both an
$
mark and
%
mark at the same time. When you add a
%
mark to a clip with an
$
mark, the
$
mark will be deleted. Similarly, when you add an
$
mark to a clip with a
%
mark, the
%
mark will be deleted.