Canon EOS C300 Mark II, Instruction Manual

Page: 68 / 223

ISO Speed/Gain
68
Using the Control Dial
You can adjust the ISO speed or gain value using the control dial on
the camera or that on the grip unit.
You will need to set in advance the function of one of the control dials
to [ISO/Gain]. You can select the function assigned to each control
dial independently.
Assigning ISO Speed/Gain Control to a Control Dial
1 Open the [Camera Control Dial] (control dial on the camera) or [Grip
Control Dial] (control dial on the grip unit) submenu.
[ System Setup]
>
[Custom Function]
>
[Camera Control Dial]
or [Grip Control Dial]
2 Select [ISO/Gain] and then press SET.
Changing the ISO Speed or Gain Value
To select whether to change the ISO speed or the gain, perform the
previous procedure (
A
67). Turn the control dial assigned to [ISO/
Gain] to set the desired ISO speed or gain value.
NOTES NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (
A
65) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• You can use the [ System Setup]
>
[Custom Function]
>
[Camera Control Dial Dir.] or [Grip Control Dial
Dir.] setting (
A
144) to change the direction of the adjustment when you turn the control dial on the camera or
on the grip unit, respectively.
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the ISO speed or
gain value with the remote controller’s ISO/GAIN
Í
/
Î
buttons.
Control dial
[ System Setup]
[Custom Function]
[Camera Control Dial]
[Grip Control Dial]
[Iris]