Canon EOS C300 Mark II, Instruction Manual

Page: 41 / 223

41
Preparing the Camera
Adjusting the LCD Panel for Shoulder Mounted Use
1 Open the LCD panel 90º until it is perpendicular to the monitor
unit.
2 Rotate the LCD panel 180º left.
3 Rotate the LCD panel 180º forward.
4 Press the MIRROR button until the image is displayed in the
correct orientation.
• Repeatedly pressing the MIRROR button will change the
displayed image in the following order: Image inverted
horizontally
Image inverted horizontally and vertically
Image inverted vertically Original image.
NOTES
• Using the handle unit (
A
44), you can attach the monitor unit in a number of different positions for maximum
flexibility by attaching it to the front, top or rear accessory shoe.
• When you use a commercially available lens adapter and the image on the screen is inverted, you can use the
[ System Setup]
>
[Custom Function]
>
[Scan Reverse Rec] setting (
A
144) to return the image to the
correct orientation.
• You can turn off the LCD screen by setting [
¢
Picture/Terminals Setup]
>
[Select Monitoring Devices] to an
option that does not include [LCD].
• About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing
techniques, with more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or
may light up permanently as white dots. This has no effect on the recorded image and does not constitute a
malfunction.
Adjusting the Viewfinder/LCD Screen
You can adjust the brightness, contrast, color, sharpness, and luminance
level of the viewfinder and LCD screen independently of each other. These
adjustments will not affect your recordings.
1 Open the setup menu for the viewfinder or LCD screen.
[
¢
Picture/Terminals Setup]
>
[LCD Setup] or [Viewfinder Setup]
2 Select [Brightness], [Contrast], [Color], [Sharpness], [Backlight]* or
[Luminance]** and then press SET.
3 Select the desired level and then press SET.
• Repeat steps 2 and 3 to adjust other settings as necessary.
NOTES
• If you set an assignable button to [LCD Setup] or [Viewfinder Setup] (
A
131), you can press the button to
open the respective submenu.
Operating modes:
햲
햳
햴
햵
You can use the viewfinder and watch
the LCD screen at the same time
* [LCD Setup] only.
** [Viewfinder Setup] only.
[
¢
Picture/Terminals Setup]
[LCD Setup]
[Viewfinder Setup]
[Brightness] ..... ±0
[Contrast] ….. ±0
[Color] ….. ±0
[Sharpness] ….. 2
[Backlight]* ..... [Normal]
[Luminance]** ….. [Normal]