manualshive.com logo in svg

Canon Color imageCLASS MF746Cdw, User Manual

Share
Download
Canon Color imageCLASS MF746Cdw User Manual Download Page 621

Replacing the Toner Cartridge

3S1Y-09W

A warning message appears in the display when the amount remaining in the toner cartridge is low or when printing

is no longer possible because of toner depletion. Note that the print quality may suffer if you continue printing without

resolving this issue. You can check the amount remaining in the toner cartridges on the display (  Checking the

Remaining Amount of Consumables(P. 618)  ).

When a Message Appear(P. 613) 
When Printouts are Poor in Quality(P. 615) 
Procedure for Replacing the Toner Cartridge(P. 615) 

When a Message Appear

The message that is displayed depends on the amount remaining in the toner cartridges. Depending on which

message is displayed, prepare a new toner cartridge (  Consumables(P. 639)  ) or replace the current toner

cartridge with a new one (  Procedure for Replacing the Toner Cartridge(P. 615)  ).

<Prepare cartridge.> 

This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a

replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print

a large job.

When a message is displayed

●

When copying or printing, you can continue printing the original.

●

If a message is displayed for the black toner cartridge when the machine is receiving a fax/I-Fax or
automatic report output is set, received faxes/I-Faxes and reports will be stored in memory so that
they do not appear faded after they are printed. To continue printing even if the amount remaining in
toner cartridge is running low, set <Continue Print. When Cart. Low> to <On>.   <Continue Print.
When Cart. Low>(P. 573) 

Specify when a message is displayed

●

You can set any value as the percentage of the amount remaining in the toner cartridge that triggers
a message.  <Display Timing for Cart. Prep.>(P. 464) 

<Low Cartridge Level>

This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a

replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print

a large job. This appears when <Action When Warning> is set to <Stop Printing> (  <Action When

Warning>(P. 464)  ).

Maintenance

613

Summary of Contents for Color imageCLASS MF746Cdw






































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands