Canon CLC5151, Sending And Facsimile Manual

Page: 98 / 476

Specifying Registered Destinations 2-36
2
Basic Sending Methods
4
Press [Start Searching].
To cancel searching while the machine is searching for your criteria, press [Cancel]. If the
machine finds some results before you press [Cancel], these search results are displayed.
IMPORTANT
•
Searching for a destination via an LDAP server is not possible if the time setting of the server and
the time setting of the machine are more than five minutes apart. If you cannot send even when
the user name and password are correct, check the time settings on the server and the machine.
•
The number of search results displayed will not exceed the maximum limit set in Register LDAP
Server in System Settings (from the Additional Functions screen). If the desired destination is not
displayed, either increase the maximum number of addresses to search, or change the search
criteria. (See "LDAP Server Settings," on p. 11-50.)
NOTE
If you press [Start Searching] without specifying any search criteria, all of the addresses stored
on the LDAP server are displayed.
●
If the Enter Network Password screen is displayed:
❑
Specify each setting
➞
press [OK].
The Enter Network Password screen is displayed if either one of the following is true:
•
If <Login Information> in Register LDAP Server in System Settings (from the Additional
Functions screen) is set to 'Use', and <Display authentication dialog when searching> is
set to 'On'.
•
If the user name, password, and domain name specified in Register LDAP Server in
System Settings (from the Additional Functions screen) are incorrect.
[User]:
Press [User]
➞
enter the user name
➞
press [OK].
[Password]:
Press [Password]
➞
enter the password
➞
press [OK].
After pressing [OK], the password that you entered appears as asterisks (********) on the
Enter Network Password screen.