Canon CLC5151, Sending And Facsimile Manual

Page: 414 / 476

Error Messages 13-10
13
T
roub
lesh
oot
ing
Error Messages
This section explains the various messages that appear on the touch panel display, along with
possible causes and remedies.
For explanations of messages that are not listed here, see the Reference Guide and Network
Guide .
Self-Diagnostic Display
Perform the necessary procedures according to the displayed self-diagnostic error message.
Self-diagnostic error messages appear on the touch panel display at the following times:
•
When scanning or printing cannot be performed because of an operational error
•
When you need to make a decision or take some action during scanning or printing
•
When you need to make a decision or take some action while browsing the network
The following is a list of self-diagnostic error messages, along with their possible causes and
remedies.
Out of resources. Wait for a moment, then perform operation again.
Cause You cannot browse the network. There is a lack of TCP/IP resources because documents
have just been continuously sent or are being continuously sent via FTP or Windows (SMB).
Remedy Wait for a while, and try browsing again.
Set the IP Address.
Cause This machine is not set with an IP address.
Remedy Specify the IP Address Settings in TCP/IP Settings in Network Settings in System Settings
(from the Additional Functions screen), turn the machine's main power OFF, and then back
ON.