Canon CLC5151, Sending And Facsimile Manual, Page: 302 / 476

Storing New Addresses 10-16
10
Sto
ring/
Edit
in
g
Addr
ess Bo
ok Se
tt
ing
s
8
Press [Standard Field 1] and [Standard Field 2]
➞
enter their respective
standard fields
➞
press [OK].
Standard Field 1 and Standard Field 2 are settings required for using an Internet fax service.
For details, contact your service provider.
If you do not use an Internet fax service, this step is not necessary.
NOTE
After pressing [OK], the standard field that you entered appears as asterisks (********) on the
I-fax settings screen.
9
Select [On] or [Off] for <Send Via Server>.
<Send Via Server>:
If you specify the Standard Field settings, set Send Via Server to 'On'.
IMPORTANT
To be able to specify the Send Via Server setting, set <Use Send Via Server> to 'On' on the
E-mail/I-Fax Settings screen beforehand. It is recommended to set <Allow MDN Not Via Server>
to 'On' on the same screen. To access the E-mail/I-Fax Settings screen, press
➞
[System
Settings]
➞
[Communications Settings]
➞
[E-mail/I-Fax Settings]. If <Use Send Via Server> is
set to 'Off', <Send Via Server> is grayed out. (See "E-Mail/I-Fax Settings," on p. 11-5.)
NOTE
Even if <Send Via Server> is set to 'Off', delivery confirmation of documents sent using the Full
mode is carried out via the server.
[On]: Sends documents via a server. You can send documents to destinations via the Internet
in the same way as e-mail.
[Off]: Does not send documents via a server. You can send large amounts of image data to a
recipient within the same LAN (Local Area Network) environment without placing a
burden on the mail server. This enables you to send documents quickly and directly to the
recipient. To use this setting, it is necessary to set up an MX (Mail eXchange) record on
the DNS server. Ask your System Manager whether this type of sending is possible
before you set Send Via Server to 'Off'.