Canon CLC5151, Sending And Facsimile Manual, Page: 66 / 476

Specifying Destinations Using the New Address Tab 2-4
2
Basic Sending Methods
Details of each item are shown below.
IMPORTANT
You cannot insert a pause at the beginning of a number.
NOTE
If you enter a pause at the end of the number, the pause is always 10 seconds long.
[Pause]: Press to insert a pause of several seconds in the fax number that you are dialing.
If you insert a pause, the letter <p> is displayed between the numbers, and the
letter <P> appears at the end of the number. When dialing an overseas number,
insert a pause after the country code, and at the end of the telephone number.
(See "Pause Time," on p. 9-43.)
[Tone]: Press when you want to directly call an extension line that is connected to a PBX
(Private Branch eXchange) which accepts only tone signals. If you press [Tone],
the letter <T> appears. (See "Fax Information Services," on p. 7-9.)
[ ][ ]:
Press to move the position of the cursor.
[Backspace]: Press to delete the last number entered.
[R]: Press to use the R-Key. (See "Special Dialing," on p. 7-5.)
[Direct]: Press to send documents directly to the recipient. If you do not select Direct
Sending, Memory Sending is used. (See "Sending a Fax," on p. 5-3.)
[Next]: Press to specify another destination after specifying the first destination using
the numeric keys.
[Subaddress]: Press to set an optional subaddress and password.
[On-hook]: Press to use tone dialing or to send a fax document manually. (See "Sending Fax
Documents Manually," on p. 1-34, or "Fax Information Services," on p. 7-9.)