Canon CLC5151, Sending And Facsimile Manual, Page: 400 / 476

Specifying Report Settings 12-10
12
Pr
inting C
o
mm
unic
ation Repor
ts
Enter all four digits of the time (including zeros), using 24-hour notation.
If you make a mistake when entering the time, press to clear your entry
➞
enter another four
digit number.
If the number of send and receive transmissions exceeds 40 before the specified time, a Fax
Activity Report of the most recent 40 transmissions is printed.
<Send/Receive Separate>:
To print the send and receive logs separately, press [Send/Receive Separate] to select it.
If it is not necessary to print the send and receive logs separately, do not press [Send/Receive
Separate].
Fax RX Report
The Fax RX Report enables you to check whether documents were sent correctly from the
sender's machine and received successfully by this machine. A Fax RX Report can be printed
automatically after documents are received, and you can also set the machine to print a Fax RX
Report only when a reception error occurs.
NOTE
•
This mode is available only if the optional Super G3 FAX Board is installed.
•
For an example of a Fax RX Report, see "Fax RX Report," on p. 14-8.
1
Press
➞
[Report Settings]
➞
[Fax] under <Settings>
➞
[FAX RX
Report].
Examples: 7:05 a.m.
➞
0705
11:18 p.m.
➞
2318