Canon CLC5151, Sending And Facsimile Manual, Page: 340 / 476

Communications Settings 11-8
11
Syste
m
Man
age
r Set
ti
ng
s
<Always send notice for RX errors>:
<Use Send Via Server>:
<Allow MDN Not Via Server>:
IMPORTANT
The maximum data size for sending must not be greater than the maximum data size of the mail
server.
NOTE
•
If you enter '0' MB as the data size, there is no size limit on the data that is sent.
•
If you set the divided data RX timeout time to '0', no divided data RX timeout time is set.
•
For I-fax, when <Send Via Server> is set to 'Off', even if you enter the maximum data size for
sending, there is no size limit on the data that is sent.
•
The maximum data size for sending can be set in 1 MB increments. If the size of an e-mail
exceeds the set limit, the e-mail message is split up by page and sent out as smaller e-mail
messages, each of which is within the set limit. I-fax data that exceeds the set limit is handled as
an error, and is not sent. For more information, contact your local authorized Canon dealer.
[On]: If an error occurs, the sender is always informed of the details of the error.
[Off]: If an error occurs, the sender is not informed of the details of the error.
[On]: Enables you to set whether to use the Send Via Server setting as a condition to send to
I-fax addresses.
[Off]: You cannot use the Send Via Server setting as a condition to send to I-fax addresses.
[On]: Allows the sending of MDN (Mail Delivery Notification) mail without going via a mail
server.
[Off]: Does not allow the sending of MDN (Mail Delivery Notification) mail without going via a
mail server