Canon CLC5151, Sending And Facsimile Manual, Page: 368 / 476

Forwarding Settings 11-36
11
Syste
m
Man
age
r Set
ti
ng
s
13
Press [Forwarding Time].
14
Select [Everyday], [Period Specification], or [Off].
IMPORTANT
You cannot set the same time for both the start time and end time.
●
If you select [Everyday]:
❑
Enter the start time and end time using - (numeric keys)
➞
press [OK].
Enter all four digits of the time (including zeros), using 24-hour notation.
NOTE
If the end time is set earlier than the start time, the received documents will stop being forwarded
at the specified end time on the following day.
For example:
Start time: 22:00, end time: 21:00
The end time refers to 21:00 on the following day.
●
If you select [Period Specification]:
❑
Press [Add].
❑
Press the Start Time drop-down list
➞
select a day of the week ([Sun] to [Sat]) at which to
start forwarding.
❑
Press [ ] next to the Start Time drop-down list
➞
enter the time at which to start forwarding.
Enter all four digits of the time (including zeros), using 24-hour notation.
If you press [All Day], the start and end times are automatically set to '00:00'. The day for the
end time is automatically set to the day following the day for the start time.
❑
Set the end time in the same way as the start time
➞
press [OK].
You can store up to seven different combinations of start and end times.
To change previously stored settings, select the setting that you want to change
➞
press
[Edit].
To erase previously stored settings, select the setting that you want to erase
➞
press
[Erase].