Can-Am outlander 400 series Operator'S Manual Download Page 19

Page: 19 / 156

2-UP Models Only



WARNING

V00A1BQ

POTENTIAL HAZARD

Failure to follow the age recommendations on 2-UP models for the pas-
senger.

WHAT CAN HAPPEN

A child, under 12, may not have the ability needed to ride safely and may
be involved in a serious accident.

HOW TO AVOID THE HAZARD

No one under 12 should be riding on this vehicle.



WARNING

POTENTIAL HAZARD

Failure to respect the physical limitations of the passenger on 2-UP models.

WHAT CAN HAPPEN

A passenger that cannot completely lean his feet on footrests can be eject-
ed when riding on uneven terrain.

HOW TO AVOID THE HAZARD

The passenger must be capable of keeping his feet on the footrests and his
hands on grab handles at all times when he is seated on the vehicle.

____________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands