Can-Am outlander 400 series Operator'S Manual Download Page 40

Page: 40 / 156



WARNING

V00A0KQ

POTENTIAL HAZARD

Skidding or sliding improperly.

WHAT CAN HAPPEN

You may lose control of this vehicle.

You may also regain traction unexpectedly, which may cause the vehicle
to overturn or passenger ejection (2-UP models).

HOW TO AVOID THE HAZARD

On 2-UP models, never slide or skid with passenger. Always remember
that the vehicle handling and stability may be affected when riding with a
passenger.

Learn to safely control skidding or sliding by practicing at low speeds and
on level smooth terrain.

On extremely slippery surfaces, such as ice, go slowly and be very cautious
in order to reduce the chance of skidding or sliding out of control.

___________

SAFETY INFORMATION

___________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands