Can-Am outlander 400 series Operator'S Manual Download Page 124

Page: 124 / 156

Oil Strainer Cleaning

The oil strainer must be cleaned every
200 hours or every 2 years or every
6000 km (3730 mi).

Contact an authorized Can-Am ATV
distributor/dealer.

Coolant Replacement



WARNING

In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.

Open the access panel and remove
the radiator cap.

V07C05Y

1. Radiator cap

On the right side of vehicle, remove
the engine cover.

Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.

V07C06Y

1. Coolant drain plug

NOTE:

Do not unscrew the coolant

drain plug completely.

Disconnect the engine temperature
sensor connectors, then unscrew the
bleeding screw on the top of thermo-
stat housing.

122

_____________________

Summary of Contents for outlander 400 series





























































































































































Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands

Can-Am outlander 400 series, Operator'S Manual

Search results

Summary of Contents for outlander 400 series

Reviews:

Related manuals for outlander 400 series

Brands by name

Popular brands