Can-Am outlander 400 series Operator'S Manual Download Page 147 | Manualshive

Page: 147 / 156

background image

Routine maintenance outlined in the Operator’s Guide must be timely performed
in order to maintain warranty coverage. BRP reserves the right to make warranty
coverage contingent upon proof of proper maintenance.

4) WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must notify a servicing Can-Am distributor/dealer within two (2)
days

1

of the appearance of a defect, and provide it with reasonable access to the

product and reasonable opportunity to repair it. The customer must also present
to the authorized Can-Am distributor/dealer, proof of purchase of the product and
must sign the repair/work order prior to starting the repair in order to validate
the warranty repair. All parts replaced under this limited warranty become the
property of BRP.

5) WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repair-
ing parts found defective under normal use, maintenance and service; or replac-
ing such parts with new genuine Can-Am ATV parts without charge for parts and
labour, at any authorized Can-Am distributor/dealer.

BRP reserves the right to improve or modify products from time to time without
assuming any obligation to modify products previously manufactured.

6) EXCLUSIONS - ARE NOT WARRANTED

The following are not warranted under any circumstances:
• Normal wear and tear;
• Routine maintenance items, tune ups, adjustments;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the Operator's Guide;

• Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP
or resulting from repairs done by a person that is not an authorized servicing
Can-Am distributor/dealer;

• Damage caused by abuse, abnormal use, neglect or operation of the product

in a manner inconsistent with the recommended operation described in the
Operator’s Guide;

• Damage resulting from accident, submersion, fire, theft, vandalism or any act

of God;

• Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

• Water or snow ingestion;

1

For EU member states the duration of the warranty coverage period is 24 months from

the date of delivery of the vehicle and the defect notification period is 2 months; any
other modalities of the warranty are subject to the applicable national or local legislation
governing the sale of consumer goods.

_____________________

145

«
...
145
146
147
148
149
...
»

Summary of Contents for outlander 400 series





























































































































































Reviews:

No comments

Related manuals for outlander 400 series

Brand: Club Car Pages: 516

POLARIS SPORTSMAN 400

Brand: Peg-Perego Pages: 40

ATV8E - SERVICE

Brand: Eton Pages: 34

Brand: LAMAX Pages: 150

Brand: Suzuki Pages: 528

BIG BEAR YFM400NN

Brand: Yamaha Pages: 161

BIG BEAR YFM400NC

Brand: Yamaha Pages: 162

BANSHEE YFZ350Y

Brand: Yamaha Pages: 142

Big Bear 400 YFM40FBB

Brand: Yamaha Pages: 156

Brand: Yamaha Pages: 156

BEARTRACKER YFM250XN

Brand: Yamaha Pages: 156

Brand: Yamaha Pages: 140

Brand: Yamaha Pages: 167

BIG BEAR YFM400FWS

Brand: Yamaha Pages: 173

BANSHEE 350 YFZ350Z

Brand: Yamaha Pages: 146

Brand: Yamaha Pages: 163

Brand: Yamaha Pages: 170

BANSHEE 350 YFZ350A

Brand: Yamaha Pages: 148

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands